[Top] [All Lists]

Re: MS-stereo and figure-8 mics

Subject: Re: MS-stereo and figure-8 mics
From: "walunit" walunit
Date: Fri Jan 1, 2010 12:06 pm ((PST))

Hi Keith,
I recommend avoiding high humidity when taking the NT5's outside. I love my 
NT5s but have had two fail on damp days. I mostly keep mine inside these days.
Take care!

--- In  "oystercoveau" <> wrote:
> Greetings everyone,
> I live in southern Tasmania and I've just joined the group and look forward 
> to tapping into the wealth of knowledge here. I have experience in 
> synthesizers and electronic music and would like to incorporate local 
> wildlife sounds into my own music (mainly experimental/minimalist). 
> I'll be recording to a Fostex FR2 in the field and would like to use MS 
> because of it's flexibility in the final mix. I've got an AT4022 omni for the 
> mid but don't have a figure-8 for the side. But I do have a matched pair of 
> NT5s and was wondering if by connecting them in parallel and pointing them at 
> 180 degrees to each other I could achieve ((more or less) the same results. 
> Or am I missing something here?
> Keith

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU