5. Re: SONY PCM-M10 noise test

Subject:	5. Re: SONY PCM-M10 noise test
From:	"Michael Raphael"
Date:	Sat Nov 14, 2009 1:38 pm ((PST))

Is there a measurement on the line input on the LS10 or LS11?

Thanks,
Michael
On Nov 14, 2009, at 4:14 PM, oryoki2000 wrote:

>
>
> Michael Raphael <> wrote:
> >
> > Any word on the noise on the line input?
>
> on Thu Nov 12, 2009, Raimund Specht wrote:
>
> "...according to my own measurements, the noise floor of the
> M10 line input is approximately -92 dBu(A), measured at
> the maximum recording level setting (position 10) that
> provides a clipping level of -2 dBu. This confirms the
> specifications provided by SONY, which says that the
> S/N Ratio should be 87dB or greater."
>
> http://tech.groups.yahoo.com/group/naturerecordists/message/38976
>
>

<Prev in Thread]	Current Thread	[Next in Thread>
5. Re: SONY PCM-M10 noise test, Mike Rooke 5. Re: SONY PCM-M10 noise test, Raimund 5. Re: SONY PCM-M10 noise test, Michael Raphael <=

Previous by Date:	4. Re: SONY PCM-M10 noise test, oryoki2000
Next by Date:	6. Re: SONY PCM-M10 noise test, Raimund
Previous by Thread:	5. Re: SONY PCM-M10 noise test, Raimund
Next by Thread:	6. Re: SONY PCM-M10 noise test, Rob Danielson
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU