| Subject: | 4. Re: SONY PCM-M10 noise test |
|---|---|
| From: | "oryoki2000" oryoki2000 |
| Date: | Sat Nov 14, 2009 1:18 pm ((PST)) |
Michael Raphael <> wrote: > > Any word on the noise on the line input? on Thu Nov=A012,=A02009, Raimund Specht wrote: "...according to my own measurements, the noise floor of the M10 line input is approximately -92 dBu(A), measured at the maximum recording level setting (position 10) that provides a clipping level of -2 dBu. This confirms the specifications provided by SONY, which says that the S/N Ratio should be 87dB or greater." http://tech.groups.yahoo.com/group/naturerecordists/message/38976 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | 3. Re: SONY PCM-M10 noise test, Michael Raphael |
|---|---|
| Next by Date: | 5. Re: SONY PCM-M10 noise test, Michael Raphael |
| Previous by Thread: | 4. Re: SONY PCM-M10 noise test, Chris Edwards |
| Next by Thread: | 5. Re: SONY PCM-M10 noise test, Mike Rooke |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU