naturerecordists
[Top] [All Lists]

Re: Cable care

Subject: Re: Cable care
From: "John Tudor" jtudor2005
Date: Sun Aug 16, 2009 4:32 am ((PDT))
--- In  Syd Curtis <> wrote:
>
>
> Take the end of your cable (the last coil you made, letting it loose >as =
necessary) and starting a metre or more from the end, wind this >firmly and=
 neatly around the bunched coils about 5 times working away >from the short=
 loop of the coils, then 3 times back.
>
> You need to have half a metre or so of free cable left.  Form this >into =
a small loop, push it through the looped coils, then open it out >enough to=
 bring it back over the outside of them.  Pull the end >tight.

I think you need to be very careful doing this. Wrapping the end around the=
 coil and pulling it tight is OK for rope, but could cause you to exceed th=
e 'minimum bend radius' of the cable and cause damage to the internal struc=
ture.







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU