| Subject: | Re: New Member Needs Help with Hum |
|---|---|
| From: | "Philip Tyler" macmang4125 |
| Date: | Fri May 22, 2009 9:33 am ((PDT)) |
The K6 module cannot be powered by PIP or plug in power. You need either
phantom power or an AA cell for the K6 to work.
I think it may be a cable problem.
Phil
On 22 May 2009, at 12:01, Michael Oates <> wrote:
Felicia,
Have you tried taking the battery out of the K6 and leaving the switch in
the ON position?
Mike
>Aaron,
>
>Tried that: recordings with the battery battery off are silent :(
>
>
>Felicia
>
>
>--- In Aaron Ximm <> wrote:
>>
>> Do you have the power switch on the [battery-powered] mic body turned on?
>>
>>
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: New Member Needs Help with Hum, Flawn Williams |
|---|---|
| Next by Date: | Lyme Disease-- A Cautionary Tale, scottsherk27 |
| Previous by Thread: | Re: New Member Needs Help with Hum, Flawn Williams |
| Next by Thread: | Re: New Member Needs Help with Hum, Dan Dugan |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU