naturerecordists
[Top] [All Lists]

Re: New Member Needs Help with Hum

Subject: Re: New Member Needs Help with Hum
From: "Philip Tyler" macmang4125
Date: Thu May 21, 2009 7:07 pm ((PDT))
Hi Felicia


It may be your cable that is not wired correctly, or faulty?

The microphone is balanced output so to wire it to a stereo 3.5mm jack plug=
 you want pin 2 of the XLR going to both the tip and ring of the jack plug =
and pins 1 and 3 going to the sleeve of the jack plug. You put pin 2 of the=
 XLR to the tip and ring so you get the same signal on both tracks of the M=
ZRH1 as it records in stereo.


Felicia I am not sure what part of the world you are in but this cable can =
be=A0purchased, if wiring your own is out of the question, from many differ=
ent traders like here:

http://www.micbooster.com/products/felleadsandadapt.html

I have an MZRH1 and a couple of K6's and ME66's and using the cable as outl=
ined above, it works great and the PIP power is not a problem.

The K6 module cannot be powered with plug-in power or PIP as it is often re=
ferred to, you need to use the K6 module with its battery for the ME67.

Phil




<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU