naturerecordists
[Top] [All Lists]

Re: Li-ion battery removal from SD

Subject: Re: Li-ion battery removal from SD
From: "Michael Oates" msohooates
Date: Thu May 22, 2008 5:50 am ((PDT))
Hi,

I know you have had this question answered, but I thought I would let you
know that there is a lot of info available on the SD website. See:
http://www.sounddevices.com/notes/recorders/battery-mount/
for an answer to this question.

It's a good resource for other issues as well.

Regards,

Mike

>I'm sure i've read on here somewhere recently about how to put in & 
>remove the Li-ion batteries from SD recorders - i'm just getting to 
>grips with a new SD702 & the battery was tough to get in & now it's 
>in I can't seem to get it out !!!! so if anyone can point me in the 
>direction of any posts that contain this info or make comments that 
>would be great.
>
>Also, when I purchased my SD I also bought a spare Hawk-Woods li-ion 
>battery & whilst it is supposed to be exactly the same as the ones 
>the SD uses the holes appear slightly smaller - tried fitting it to 
>the SD but couldn't get it into the metal pins apart from the first 
>few mm's - which appeared to have squashed the SD's pins slighly. 
>Any ideas ?
>
>perhaps anyone with tips could email me direct if these kind of 
>questions have already been covered on the forum:
>
>
>
>ta,
>Jez



<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU