naturerecordists
[Top] [All Lists]

Re: MKH 50 V ME 66

Subject: Re: MKH 50 V ME 66
From: "clay" cfmspencer
Date: Mon Apr 14, 2008 10:28 am ((PDT))
Hi John,

one important consideration for me when choosing mics
is the actual 'sound' of what's recorded and  I don't own an
ME66 for precisely that reason - I listened to it in side by side
comparisons
with several mics,  including much less costly mics, and
ALL sounded more life-like to me.

Some of the other mics incuded: Sennheiser 418S,
Rode NTG-2 and even Rode Videomic.  The ME66
sounded shrill and metallic by comparison.

Eventually I settled on the MKH series, 20, 30, (soon-to-be 40)
along with Rode StereoVIdeoMic and NTG-2.

Your mileage may vary.

Clay




On Mon, Apr 14, 2008 at 11:19 AM, Rob Danielson <> wrote:

>   At 4:24 AM +0000 4/14/08, John Tudor wrote:
> >I see a lot of posts about the MKH 50 being used in an M/S
> >configuration. But looking at the specs it seems the ME66 is a better
> >mic. Am I NOT reading something in the specs that I should???
> >
> >Microphone-data.com has sensitivity & self noise as
> >MKH 50 25 mV/Pa & 12 dB-A
> >ME 66 50 mV/Pa & 10 dB-A.
> >
> >Am I missing something here???????
> >Is it purley the polar pattern difference that's important in the MKH
> >50 being preferred??
> >
> >John
> >
>
> Good question, John, and probably one that only someone who owns and
> uses both mics on a very low noise recorder can answer fully. I don't
> own the mic.
>
> In the ME66 tests and recordings I've heard posted, the ME66 did not
> seem to have self-noise performance on par with that of other mics I
> accept as in the neighborhood of 10 dB(A) like the mkh-20. I recall
> one ME66 having more noise in a side by side test with a mkh-40 with
> 12dB(A) self noise.
>
> Sennheiser doesn't state the mic capsule type in the current spec
> sheet for the ME66 but I seem to recall that it is elecret, "ME."
> With 10dB(A) noise performance, it might be the lowest self-noise
> electret mic we know of. I have compared a ME62 [15dB(A)] with
> another mic with 14dB(A) self-noise and the ME-62's noise was
> considerably greater and lower in the frequency spectrum.
>
> Based entirely on clues and I may be entirely wrong, I've been
> assuming Sennheiser's self-noise numbers on the ME series are not
> "apples and apples" with some of their other models. Hopefully,
> someone can provide something more concrete. Walt may own both
> models. Rob D.
> --
>
>
>






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU