naturerecordists
[Top] [All Lists]

Zoom H2 startup time

Subject: Zoom H2 startup time
From: "oryoki2000" oryoki2000
Date: Thu Nov 15, 2007 8:33 pm ((PST))
One issue I had with the Zoom H2 was the long startup time.  Using a
4GB SD card, it took about 45 seconds to be ready to record.  Now it
seems that there's a way to speed this up -- read on!

A person posting as "Ben" on the O'Reilly Digital Media web forum
reported the following:

"At first I'd formatted the SD card (2GB 150x) in my laptop as FAT32.
The H2 seemed to have no problem with that but I was getting 25-30
secs startup time. I then tried formatting it in the H2, and noticed
it formatted it as FAT (not FAT32). Since then I'm getting a startup
time of 6 secs - with the same card."

So if you format the SD card in the H2 rather than a computer, the
startup time is very brief.

--oryoki





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU