[Top] [All Lists]

Re: [gear] Zoom H2 self-noise estimate

Subject: Re: [gear] Zoom H2 self-noise estimate
From: "Rob Danielson" danielson_rob
Date: Sun Sep 9, 2007 12:13 am ((PDT))
At 2:17 AM +0000 9/9/07, oryoki2000 wrote:
>A post to a Zoom discussion forum sheds some
>light on the mic and preamp noise level of
>the new Zoom H2 recorder.  The test results
>show that the H2's EIN is somewhere around -115 dB
>when using the internal mics. 



Hi Oryoki--
Could those numbers could be misleading? Self-noise performance from 
the H2's built-in mics comparable to -115 EIN dBA would be comparable 
~12dBA self-noise and 18mV/Pa sensitivity according to Table 3: .  Rob D.

"While a picture is worth a thousand words, a 
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU