| Subject: | Re: About Wl-183 |
|---|---|
| From: | "Steve Pelikan" pelikan45224 |
| Date: | Thu Sep 6, 2007 8:27 am ((PDT)) |
Zach: Rob Danielson's got a very informative page about WL 183's: http://www.uwm.edu/~type/audio-reports/Shure-WL183s/index.htm has links to documents explaining how to set up a pair of 183's so they can run on PIP from devices like a MD recorder. I think this is what most people have done --- wire two of them to a 1/8" TRS plug. Steve P --- In zachary moldof <> wrote: > > Hello all, > > All this talk about the Wl-183 has me intirgued. Is it an easy mod to = > change the plug on the Wl-183? I am assuming that people are swapping = > out the mini 4 pin plug for 1/8 inch. For those who have them, have > you modified, and if so, what did you modify to? > > From, > Zach > |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | About Wl-183, zachary moldof |
|---|---|
| Next by Date: | Re: About Wl-183, Rob Danielson |
| Previous by Thread: | About Wl-183, zachary moldof |
| Next by Thread: | Re: About Wl-183, Rob Danielson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU