Hi Oryoki,
I had the MR-1000 for few days only. I don't remember about
the digital input...
With line level signals the noise floor is low and flat till 40 kHz,
then it increases as already described.
My equipment don't allows to compare the quality of DSD vs PCM,
though I have some test files and I could publish some result in the
first week of my holidays... (hope next week)
Gianni
At 01.31 31/07/2007, you wrote:
>Gianni,
>
>I understand that the MR-1000 has no digital input,
>only analog. Any signal from an external preamp
>will pass to the MR-1000 as a line-level analog
>signal. The MR-1000 digitizes and stores the
>line-level input as 1 bit digital, or as PCM
>digital (up to 24/192).
>
>Have you tried using an external preamp with the
>MR-1000? I'm curious to know if this approach
>helps the MR-1000 produce a higher quality result.
>
>--oryoki
-------------------------------------------------------------------------------------------------------
Gianni Pavan
Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
Universita' degli Studi di Pavia, Via Taramelli 24, 27100 PAVIA, ITALIA
Phone +39-0382-987874 Fax +39-02-700-32921
Email
Web http://www.unipv.it/cibra
--------------------------------------------------------------------------------------------------------
CIBRA organizes the XXI IBAC Congress, Pavia, 15-18 September 2007
http://www.unipv.it/cibra/xxi_ibac.html
--------------------------------------------------------------------------------------------------------
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.11.0/927 - Release Date: 30/07/2007 17.02
|