Re: PZM mods

Subject:	Re: PZM mods
From:	"Lou Judson" inaudio
Date:	Thu Apr 26, 2007 12:11 pm ((PDT))

Thanks. I'd assumed you were going directly into a minidisc deck.
Looking forward to the audio!

<L>

Lou Judson =95 Intuitive Audio
415-883-2689

On Apr 26, 2007, at 11:01 AM, Kim Cascone wrote:

>> where are you getting the 9V from? I thought PIP was 3 - 5 V. Maybe
>> that's enough.
>>
>> Got some signal to noise tests we can hear?
>
> the web page
> http://www.soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP-4
> for my preamp states:
>
>> Built-in 9 volt "plug-in-power" at mic input jack - no additional
>> battery module needed to power your mini microphones!
>
> I haven't measured the voltage under load but I'm assuming that it's
> around 8.0 - 9.0v
>
> I'll do some recordings this week and post the files as .wavs to the
> list server

<Prev in Thread]	Current Thread	[Next in Thread>
PZM mods, Kim Cascone Re: PZM mods, Lou Judson <=

Previous by Date:	PZM mods, Kim Cascone
Next by Date:	Re: [gear] FR-2LE first impressions [long msg], oryoki2000
Previous by Thread:	PZM mods, Kim Cascone
Next by Thread:	boundary mics study, Kim Cascone
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU