--- In Chuck B <> wrote:
>
The foam is not packed in the filter. It is just a 2" thick plug used
as a shock mount. Standard fabric store 2" foam rubber sliced with a
carving knife and then stabbed in the middle to hold the mic.
Also, the plastic strainer with the handle cut off was bought at
Target rather than the hardware store.
No problem using multiple filters for a shotgun. I would probably sew
them with metal picture hanging wire but silicon rubber adhesive would
probably work fine too. For a shotgun I would be inclined to use a
strainer on each end and use rubber bands for the shock mount instead
of the foam. This is because with a long mic you likely will want two
mounts to the mic.
Rich
> Rich Peet wrote:
>
> >Sure, The filter and all parts except the spandex swimsuit material
> >can be purchased from any hardware store.
> >
> >
> The inside of the filter is packed with - what kind of foam? And,
> have you tried multiple filters to accomodate a shotgun?
>
> Thanks - Chuck
>
>
> ========
> Chuck Bragg, Pacific Palisades, CA
> Membership, Newsletter, Web manager
> Santa Monica Bay Audubon Society
> www.smbas.org
> ========
>
|