[Top] [All Lists]

Re: Telinga Pro6 /Fostex FR2 Problem

Subject: Re: Telinga Pro6 /Fostex FR2 Problem
From: "Lindsay Cargill" loxiaguitarista
Date: Sun Nov 5, 2006 10:38 am (PST)
--- In  Dan Dugan <> wrote:
> ...
> >However, once the noise cuts, the FR2 can be switched on and off
> >with no problems. Seems ridiculous to say it but it is like the mic
> >needs to warm up ?!
> Sounds like a defective electrolytic capacitor that "heals" itself
> after a few minutes of polarization.
> -Dan Dugan

Thanks Dan. Is this capicitor in the mic or the recorder ? I have also
contacted Telinga and sent a sound sample with the noise, then it
cutting out, but am awaiting a reply. Seems to be on the right
channel/mic capsule of the Twin Science.


<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU