[Top] [All Lists]

Re: [gear] Zoom H4 recorder

Subject: Re: [gear] Zoom H4 recorder
From: "Lou Judson" inaudio
Date: Mon Oct 16, 2006 7:19 pm (PDT)
Page 86 - but nothing useful in there:
\Inputs Input XLR (balanced input)/standard phone (unbalanced input)
combo jack Input impedance (using balanced input) 1 kilohm balanced,
pin 2 hot (using unbalanced input) 480 kilohms unbalanced Input level
(INPUT1,2 switch) (using balanced input) L -20 dBm (for mic) M-30 dBm
(for mic) H -40 dBm (for mic) (using unbalanced input) L -10 dBm (for
guitar, bass, line input) M-30 dBm (for mic) H -40 dBm (for mic)
Built-in stereo mic Unidirectional condenser microphone Gain (mic
switch) L +6 dB M+20 dB H +30 dB Phantom power supply  48V, 24V, OFF

is all it says...

Lou Judson =95 Intuitive Audio

On Oct 16, 2006, at 6:57 PM, oryoki2000 wrote:

> Lou, please give us a hint where to find the specs in the manual!
> I didn't see any self-noise information.  Thanks.
> --oryoki

"Microphones are not ears,
Loudspeakers are not birds,
A listening room is not nature."
Klas Strandberg

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:


<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU