naturerecordists
[Top] [All Lists]

Re: Hi-MD issue - noise from static charge

Subject: Re: Hi-MD issue - noise from static charge
From: "Lou Judson" inaudio
Date: Mon Sep 18, 2006 8:12 am (PDT)
Pencil eraser can help.

Lou Judson =95 Intuitive Audio
415-883-2689

On Sep 18, 2006, at 6:58 AM, Walter Knapp wrote:

>> Isopropyl alcohol would work just as well, anything really to remove
>> the grease that acumalates on the connectors.
>
> There can also be a oxide layer on the metal contacts. Isopropyl won't
> remove that, though some contact cleaners will.





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU