naturerecordists
[Top] [All Lists]

Re: [CORRECTION] Pearl MSH-10 and Rode Stereo VIdeo Mic

Subject: Re: [CORRECTION] Pearl MSH-10 and Rode Stereo VIdeo Mic
From: "stoatwizard" stoatwizard
Date: Sun Aug 27, 2006 11:10 am (PDT)
> than the NT-4.  Its self-noise is close to the
> NT-4's (16dBA). Its 6mV/Pa sensitivity is low
> compared to 12mV/Pa for the NT-4.  The ample gain
> on a Hi-MD recorder could come in handy. Of

You may take a slight noise hit, however. The sensitivity indicates a
noise floor of 94-16 =3D 78 dB below reference level output, ie a self
noise of 0.8uV

en for a HiMD MZ-NH700, mic-sens H rec level 28/30 is about 1uV, on a
par with the mic, so you may take about a 3dB hit on the noise
performance, as a result of the poor sensitivity of this mic (or the
higher than ideal noise perf of the HiMD, if you look at it that way)







"Microphones are not ears,
Loudspeakers are not birds,
A listening room is not nature."
Klas Strandberg

------------------------------------------------------------------------
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/naturerecordists/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

------------------------------------------------------------------------



<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU