naturerecordists
[Top] [All Lists]

Re: batteries for the 722 - my experience

Subject: Re: batteries for the 722 - my experience
From: "Dan Dugan"
Date: Fri May 26, 2006 6:38pm(PDT)
Ryan Philippi wrote,

>I just received two of these F960 batteries I purchased from
>KeyBattery.com, after charging them I went to put one in my SD722 and
>immediately the plastic "locking plate" (not sure of the proper term)
>seperated from the battery compartment, rendering it totally
>useless.

Superglue?

>Not only that but the second "working" battery doesn't quite fit in
>my SD722, it won't slide down far enough to engage the lock.  So
>while it will provide power, it doesn't seat properly and is easily
>knocked off.

I had a similar fit problem with an Energizer ER-C525 battery--it
jammed going into the slot. Apparently Sound Devices designed the
space to be snug with a Sony battery and they weren't aware of the
range of dimensions encountered with others. My jam was easily
solved, however, with a few strokes of a file on the offending
corners of the battery.

If it doesn't fit, adjust, don't force!

-Dan Dugan



<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU