On 11/2/05, Mark R. <> wrote:
>
> Hi Klas
>
> >Comfort, - if you can overlook with the insanity of making a recorder
> which
> >has no stand-by monitoring, that is.
> >Having monitoring only when recording - which difference does it make fo=
r
>
> >such a recorder's current consumption? Just a single headphone amp vs.
> the
> >entire recording circuit?
> >Does anyone have a good guess?
>
> Not exactly to your query, but in general, here is my best guess:
> Maudio put some beginning design engineers on the project, presented it
> at AES, not seriously considering putting it out until it created such
> interest. Then instead of really putting some money into R and D, they
> released it almost as is. Len at Core sound pointed out that it is a
> supremely difficult task to properly shield circuits with the type of
> display that Maudio was using. I would be interested to hear if Dan had a=
ny
> suspicions that the source of the mic input noise to interference coming
> from the display. If so, then that might be a place to start with a
> modification of the MT.
> Please no controversy here, just my guess ;^)
> Best,
> Mark R.
>
>
>
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
|