naturerecordists
[Top] [All Lists]

New recorder from Tascam

Subject: New recorder from Tascam
From: Henry Howard <>
Date: Tue, 11 Oct 2005 16:31:02 -0400
I don't think anyone here has mentioned the new CF recorder from
Tascam, the HD-P2 - records in stereo from 44.1kHz to 192kHz, at 16- or 24-=
bit.

Audio performance
Frequency response  20 Hz to 20 kHz, =B11.0 dB (44.1/48 kHz)
20 kHz to 40 kHz, +0.5 dB/3.0 dB (88.2/96 kHz)
Noise Level  < -55 dBu (MIC to LINE OUT)
Dynamic range  > 105 dB(A) (MIC to LINE OUT, 44.1 kHz, 22-kHz LPF)
Total harmonic distortion  < 0.01 % (1 kHz, MIC to LINE OUT, max level
(2222,000 Hz), Trim min, 22-kHz LPF)
Crosstalk  > 80 dB (1 kHz)
Delay  1.5 ms (44.1 kHz)
0.7 ms (192 kHz)
Phantom Power  +48 V, 10 mA

12 V DC
Batteries  8 x AA (SUM-3), Alkaline, NiMH, NiCd
Power consumption  6 W
Dimensions (W x H x D)  245 mm x 188 mm x 60 mm
Weight  1.2 kg (excluding batteries and AC adapter)
FIREWIRE  IEEE 1394 (6-pin)

around $1200 ?






Henry Howard  770 923 7955              770 823 8796 Cell
        Audio Craft - Studio and Location recording.
                Atlanta, Georgia and the SE




________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
  • New recorder from Tascam, Henry Howard <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU