> I looked at the OKM site.
> http://www.soundman.de/englisch Apparently the
> A-3 adaptor supplies a higher power voltage for
> recording higher levels. It isn't clear from the
> web site whether it has any gain.
As far as I know it supplies 6 Volt to the mics, and it is made so
that you can bypass the micpreamp of the MD. No amount of gain is
documented, but it is not a traditional preamp; it is an 'adapter',
it adapts the mic signal for line level input, and it has some
filtering (either a full -20 dB, a high pass filter, or both at the
same time).
> What is going wrong? Have you contacted OKM?
I've had small problems once, emailed them and got a nice and
helpfull reply.
By the way, if you want to check out my OKM recordings:
http://members.home.nl/mistermouse/
________________________________________________________________________
________________________________________________________________________
|