naturerecordists
[Top] [All Lists]

Re: Sony TCD-D10 Pro II

Subject: Re: Sony TCD-D10 Pro II
From: "bbystrek" <>
Date: Sat, 15 Jun 2002 04:04:39 -0000
Mark,

I'm wrong.  I'm thinking of the wrong unit - the PCM-M1 is equivalent 
the the TCD-D100, not the TCD-D10.  Sorry for the mixup.

Brian Bystrek



--- In  "bbystrek" <> wrote:
> Mark,
> 
> I have the Sony PCM-M1, which I think is the same recorder except 
> with configurable copy protection mode.  I'm 
> interested in the same question you are.
> 
> I have not had much luck finding any details on the remote control 
> unit.  B&H Photo Video in New York City had carried it about six 
> months ago.  I think I need to spend some more time probing Sony 
Pro 
> Audio Parts and Service directly.  I tried a S/PDIF to RCA output 
> cable from Core Sound (found on the Web) but the pin spacing was 
not 
> even close.  The row of four pins on the cable were spaced equal to 
> three of the pins on the M1's 7-pin connector. They accepted my 
> return, but insisted that I could have "forced" it in.
> 
> Instead, I have temporarily jury rigged a cable based on a 
continuity 
> check of the core sound cable using a common style high speed coax 
> data cable soldered between an RCA connector and a couple of 
minature 
> gold pins.  It seems to work without any issues with my Echo Mia 
> audio card.  I have probably transferred about ten hours of 
material 
> so far.  I can identify the output pins I'm using if you wish.  I 
> would like to find a wiring diagram though - I suspect there are 
> probably dry-contact type control lines to control the transport.  
I 
> will send out another message asking if anyone has the wiring 
> diagram.  I suspect Sony Parts and Service would be able to provide 
> one.  I just have not had a chance to ask yet.
> 
> Brian Bystrek
> 
> 
> --- In  "Mark Griswold" <> 
> wrote:
> > 
> > Since we're delving into our D10s...
> > 
> > Does anyone know where to obtain the remote control/digital i/o 
> multi-pin
> > connector?
> > 
> > I want to build a cable that will allow me to use the remote AND 
> digital
> > i/o.
> > 
> > Or maybe one of you knows someone who could build such a cable...
> > 
> > Thanks,
> > Mark



________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU