Re: [ts-7000] TTL serial on a TS7200

[Jonathan Leslie <>]

I dont' know the ts7200 specifically, but the ts7500 you just solder onto the 
RX and GND pins to the gps modules TX and GND pins and you are hardware ready 
to go. The GPS module broadcasts 1 a second a dump at 4800 BPS. 


  





>________________________________
> From: Yan Seiner <>
>To: 
>Sent: Friday, February 28, 2014 10:40 AM
>Subject: [ts-7000] TTL serial on a TS7200
>
>
>
> 
>I have a TS7200 that I'd like to interface with a GPS module.  Most of
>the bare modules are TTL - 3.3 to 5V.  Is there a way to set up a serial
>port on the 7200 with ttl levels?
>
>I need RX, TX, and DCD pins active on the serial port for the GPS.
>
>
>
>