[ts-7000] Failed to restore XNAND

To:	<>
Subject:	[ts-7000] Failed to restore XNAND
From:	<>
Date:	29 Jan 2014 12:43:40 -0800

Hi,

I've been working on the TS-7553 for 2 years.

I just tried to restore the XNAND of one of the TSs I have here, the same way I've done many times:

nandctl -XW 2048 -z 131072 -i /mnt/root/root/xnandimg-latest.dd

but, surprisingly I got e following output:

sectors=0

chipid=0x0

blocksize=131072

nandctl: nandcore.c: 1171: xnandread: Assertion sector + nsectors = nc-size / 2 failed.

Aborted

Im booting from the SD-Card.

The board is TS-7553 REV.C.

Is the XNAND dead?

Any ideas?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Failed to restore XNAND, ramirosenbaum <=

Previous by Date:	Re: [ts-7000] making a backup of a sd card for insertion into a new ts-7500, Jonathan Leslie
Previous by Thread:	[ts-7000] making a backup of a sd card for insertion into a new ts-7500, jleslie48
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU