ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ts-7000] ts-7800 how do I make 4 (at least 2) identical ne

from [Cody Browne] [Permanent Link][Original]
To:
Subject: Re: [ts-7000] ts-7800 how do I make 4 (at least 2) identical ne
From: Cody Browne <>
Date: Fri, 1 Nov 2013 18:21:42 -0600


Extending on Walter's method, you could use a managed/smart network switch that supports port based VLAN. The TS7800 could then VLAN tag the outgoing messages based on your DIP switch setting.



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network stacks?, Paul Yanzick
Next by Date:  Re: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network stacks?, Jonathan Leslie
Previous by Thread:  [ts-7000] Factory defaults ts-7260, alexmbs86
Next by Thread:  Re: [ts-7000] ts-7800 how do I make 4 (at least 2) identical ne, Walter Marvin
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU