while my post was in moderation i rwcompile ts7500ctl and worked but after
load i g igwr io error from SD card
Should i preload bitstream before debian swap boot?
--- In Ã?ngel <> wrote:
>
> Hello all (this my first post)
> I had been working in with Ts7500 for couple of project last year .Now
> have a couple of spare units I would like to play withFPGA.I would like
> to upload any of available prebuilt core bitstream prior to build my on
> on isp lever o Diamon tools.But when i try it using described commands
> I get Linux ts7500 2.6.24.4 #10 Tue Oct 13 16:15:47 MST 2009 armv4l
> :~# ts7500ctl
> --loadfpga=ts7500_opencore-rev6-CAN-4XUART.vme.gzloadfpga_ok=0loadfpga_e\
> rror="verification fail"
> I have cheched some bitstream and got the same for all I have search the
> group and find similar issue but i found any response about it.Can
> somebody point me what i´m doing wrongThanks
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|