|
I'm not sure about the 7550, but the 7500 has onboard flash you can boot from. What you do with the 7500 to recover without the 752 is take Technologic's stock image and burn to the sd card and boot from sd. you can then restore the flash from there. Hope that helps From: marcioomonte <> To: Sent: Tuesday, October 16, 2012 8:23 PM Subject: [ts-7000] Re: [ts7550] Anyone tried to de-brick without TS-752? I have condition to do like schematic, but what i will put in the flash? what kind of file system i will format this flash?
buy a ts-752 is out of my pocket now! --- In , "naturalwatt" <> wrote: > > > > --- In , "marcioomonte" <marcioomonte@> wrote: > > > > > > Hello! > > > > I tried to update kernel to put the wifi to work. But when i tried the kernel zimage with nandctl command the board bricks... And reboots itself before enter in the bootroom... > > > > I looked at the manual and it says that i have to have the ts-752 > > > > i cant enter in TS-BOOTROM and i don't have the TS-752. > > > > Any idea what should i do? > > > > > There are basically two choices at this point: > > 1) Buy a TS-752 > > 2) Make up a board with a NAND FLASH on it using the schematic of the TS-752 as guidance - you obviously don't have to make the bits you don't want. > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |