|
Hi, I did the command that you have recommended. After that, I lost the Redboot prompt and could never get it back. Serial communications seem be lost at the moment. Kamran From: Jason Stahls <> To: Sent: Wednesday, October 3, 2012 3:04:52 PM Subject: Re: [ts-7000] Re: Can't execute Linux - invalid entry address Did you do
fis load vmlinux at the redboot prompt before the exec line? Jason Stahls On 9/29/2012 7:58 PM, kamran wrote: > Hi, > > I have been able to get my hand on a TS-7200 as well, and I too get the same message. I did also add the exec line to the fconfig script. > I just wanted to ask whether you did work around this error. > > Thanks, > > KB > --- In , "jfahlmanacd" <> wrote: >> I am rather new to linux and have run across the following problem >> using the developer's kit. I wanted to boot from the CF provided in >> the developer's kit so I changed the execute command using fconfig so >> that: >> >> exec -c "console=ttyAM0,115200 root=/dev/hda1" >> >> But after doing that I get the error "Can't execute Linux - invalid >> entry address" when trying to boot to the CF. >> >> I have now tried to revert back to the original: >> >> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1" >> >> But I still get the same error: >> >> >> >>>> TS-BOOTROM, Rev 1.06 - built 14:21:24, Dec 5 2005 >>>> Copyright (C) 2005, Technologic Systems >>>> TS-7200: Rev E0 CPU, Rev C PLD, 32MB SDRAM >> +IDE failed to identify unit 0 - wrote: b0, read: 0 >> Ethernet eth0: MAC address 00:d0:69:40:31:01 >> IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.11 >> Default server: 192.168.0.11 >> >> RedBoot(tm) bootstrap and debug environment [ROMRAM] >> Non-certified release, version current-TS_5 - built 15:41:04, Mar 8 >> 2005 >> >> Platform: TS-7200 Board (ARM920T) Rev A >> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. >> >> RAM: 0x00000000-0x02000000, [0x00044c28-0x01fdd000] available >> FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes each. >> == Executing boot script in 0.100 seconds - enter ^C to abort >> RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1" >> Can't execute Linux - invalid entry address >> RedBoot> >> >> >> >> There is also the IDE failed problem but I still get the "Can't >> execute..." error even with the CF removed. >> >> Any help is greatly appreciated. Thanks, >> Jason >> __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |