The assignment of device names is architecture-specific. On a x86 based Linux
host, the SD flash will be identified as /dev/sdX, where X is some letter,
probably low in the alphabet. On the TS-Arm architecture, SD devices are
identified as /dev/tssdcarda. The 'a' suffix is because the SD flash is always
the first device mapped. Numeric suffixes denote the partition numbers, just
like they do on other architectures. The 5th partition on your SD flash should
therefore be seen as /dev/tssdcarda5 on your TS-Arm host.
--- rod.
--- In Don Tucker <> wrote:
>
> I used GParted to add another partition to my SD card. GParted
> indicated that there were a maximum of 4 primary partitions allowed, so
> I had to create an extended partition (/dev/sdb4) that contains the
> original 4th partition and the new 5th partition (/dev/sdb5 and
> /dev/sdb6). Normally, during bootup linuxrc-sdroot assigns
> /dev/tssdcarda4 as the root file system. Does anyone know where
> /dev/tssdcarda4 gets assigned to /dev/sdb4? I need to assign it to
> /dev/sdb5, now that I have the extra partition.
>
> Don
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|