ts-7000
[Top] [All Lists]

Re: [ts-7000] problem with ts7xxx.subr utilities

To: "" <>
Subject: Re: [ts-7000] problem with ts7xxx.subr utilities
From: Damian Miralles <>
Date: Tue, 5 Jun 2012 13:37:59 -0700 (PDT)


Hello:
Thank you all for the replys, finally i got the shell functions utilities working. The other step that i had to take was to put the 'peekpoke executable' in the PATH enviroment variable, then change the permissions with chmod a+x. With that I was able of performing the previous steps.
Thanks again
Damian

From: Damian Miralles <>
To: "" <>
Sent: Monday, June 4, 2012 1:38 AM
Subject: Re: [ts-7000] problem with ts7xxx.subr utilities

 
Hello:
Well, I do not set the model enviroment, so if you could tell me will be great. Another issue is that i checked the .subr and It uses the peekpoke.c and peekpoke.h. Those are not in my SBC so i am going to download it from the FTP site. Could you advice me where to put it for proper functionality.
Thanks a lot for the support
Damian

From: Don Tucker <>
To:
Sent: Friday, June 1, 2012 1:22 PM
Subject: Re: [ts-7000] problem with ts7xxx.subr utilities

Did you type ". ./ts7xxx.subr" (without the quotes) before trying the
subroutines?  Both periods are necessary.  Also, the header of
ts7xxx.subr mentions that you need to set the 'model' environment
variable to whatever is appropriate for your board prior to running the
subroutines.  Did you do that as well?

Don

On 6/1/2012 11:13 AM, Damian wrote:
> Hello:
>
> I am working with a TS-7260 and I am trying to use some of the utilities of the TS-LINUX listed on your manual. However I have not been able of using the ts7xxx.subr. I downloaded it from the FTP site and install it in the SBC, it get installed sucessfully  however I do not recognise the command once they are issued. For example:
>
> cpu_speed_166
> returns
>
> command not found.
>
> Is there any other step that I am missing.
> thank you
>
>
>
>







__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU