|
Hello: Well, I do not set the model enviroment, so if you could tell me will be great. Another issue is that i checked the .subr and It uses the peekpoke.c and peekpoke.h. Those are not in my SBC so i am going to download it from the FTP site. Could you advice me where to put it for proper functionality. Thanks a lot for the support Damian From: Don Tucker <> To: Sent: Friday, June 1, 2012 1:22 PM Subject: Re: [ts-7000] problem with ts7xxx.subr utilities Did you type ". ./ts7xxx.subr" (without the quotes) before trying the subroutines? Both periods are necessary. Also, the header of ts7xxx.subr mentions that you need to set the 'model' environment variable to whatever is appropriate for your board prior to running the subroutines. Did you do that as well? Don On 6/1/2012 11:13 AM, Damian wrote: > Hello: > > I am working with a TS-7260 and I am trying to use some of the utilities of the TS-LINUX listed on your manual. However I have not been able of using the ts7xxx.subr. I downloaded it from the FTP site and install it in the SBC, it get installed sucessfully however I do not recognise the command once they are issued. For example: > > cpu_speed_166 > returns > > command not found. > > Is there any other step that I am missing. > thank you > > > > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |