Enter "ts7800ctl -h" for help on the ts7800ctl command.
Enter "man dd" for help on the dd command.
Enter "man hexdump" for help on the hexdump command.
--- In "vidhyaverma88" <> wrote:
>
> Hi I am trying to configure the ts7800 ADC ,I am using the ts7800 manual
> ,when I run the below command for the sampling at 2khz for channel 0,at
> different input voltages, then I found the following output , can
> anybody tell me what these output signifies ???
>
> Command:
> ts7800ctl -r"0" | dd bs=2 count=1000 2>/dev/null | hexdump -v -e '1/2
> "%u, "' > ch0_500_samples.csv
> Output:
> 30768, 25445, 12387, 25445, 2659, 30768, 25445, 12387, 25445, 2659,
> 30768, 25445, 12387, 25445, 2616, 30768, 25445, 12387, 25445, 2616,
> 30768, 25445, 12344, 25445
>
> These readings are corresponding to 1v input.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|