[ts-7000] TS7800 ADC

To:
Subject:	[ts-7000] TS7800 ADC
From:	"vidhyaverma88" <>
Date:	Tue, 27 Mar 2012 08:31:07 -0000

Hi I am trying to configure the ts7800 ADC ,I am using the ts7800 manual ,when I run the below command for the sampling at 2khz for channel 0,at different input voltages, then I found the following output , can anybody tell me what these output signifies ???

Command:

ts7800ctl -r"0" | dd bs=2 count=1000 2>/dev/null | hexdump -v -e '1/2 "%u, "' > ch0_500_samples.csv

Output:
30768, 25445, 12387, 25445, 2659, 30768, 25445, 12387, 25445, 2659, 30768, 25445, 12387, 25445, 2616, 30768, 25445, 12387, 25445, 2616, 30768, 25445, 12344, 25445

These readings are corresponding to 1v input.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7800 ADC, vidhyaverma88 [ts-7000] TS7800 ADC, vidhyaverma88 <= [ts-7000] Re: TS7800 ADC, Harold

Previous by Date:	[ts-7000] RedSleeve Enterprise Linux 6 for ARM, Jon Brinkmann
Next by Date:	[ts-7000] Re: ts-7250 network failing, al
Previous by Thread:	[ts-7000] TS7800 ADC, vidhyaverma88
Next by Thread:	[ts-7000] Re: TS7800 ADC, Harold
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU