| To: | <> |
|---|---|
| Subject: | [ts-7000] Ethernet drivers in 2.6.29-ts kernel |
| From: | dtucker <> |
| Date: | Mon, 19 Mar 2012 16:02:04 -0500 |
Can someone tell me how I would load the drivers for TS-ETH2 boards when using
the 2.6.29-ts kernel? When using the 2.6.21-ts kernel I could put
-o ts-eth2-1 ax88796b mem=0x200 irq=33
-o ts-eth2-2 ax88796b mem=0x240 irq=40
into /etc/modules (I'm running a TS-7260 base board), but the 2.6.29-ts kernel
doesn't have the ax88796b driver. It has ax88796 and ax88796_ts_eth100, but
modinfo doesn't show either of those to accept parameters.
Don
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: Problem with DIO header of TS 7800, naturalwatt |
|---|---|
| Next by Date: | Re: [ts-7000] Problem with DIO header of TS 7800, Jim Jackson |
| Previous by Thread: | [ts-7000] Re: Problem with DIO header of TS 7800, naturalwatt |
| Next by Thread: | [ts-7000] Ethernet drivers in 2.6.29-ts kernel, Don Tucker |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU