[ts-7000] Re: TS-GSM1 not detected by TS4700 problem

["ie.mclay" <>]

I'd also like to add the following details:

The TS-GSM1 is setup with its default settings (COM1/IRQ7).

I've attempted the following so far (to no avail):

* Access the PLD board identifier register (should be 0x9):

'peekpoke 8 0x11E0_0000' - returns 0xFF
'peekpoke 8 0x11C0_0000' - returns 0x0

* Changed IRQ and COM port settings (various combinations)

* Tried in both fast-boot and SD environment.

Should I expect to see an entry for the device in the dmesg log?

I notice that the tsuart1.ko kernel module is NOT present. Is this essential to 
allow the kernel to recognise the on-board 16C550 UART?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/