[ts-7000] TS-GSM1 not detected by TS4700 problem

["ie.mclay" <>]

I have a TS4700 macrocontroller / TS8100 baseboard with a TS-GSM1 connected to 
the PC/104 interface.

The problem I have is that the TS-GSM1 board is NOT detected at startup by the 
TS4700.

 As I understand, the TS4700 should detect the 16550 UART on the TS-GSM1 board 
and add a /dev/ttySx (or similar) device.

After booting using the 'fast boot' startup method, I checked the diagnostic 
message log and got the following:

# dmesg | grep tty
pxa2xx-uart.0: ttyS0 at MMIO 0xd4017000 (irq = 27) is a FFUART

I believe the detected UART belongs to the CPU. There is no sign of the TS-GSM1.

Any help on this issue would be much appreciated.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/