You must recompile the kernel. It isn't bad at all using the instructions in
the software users manual. The only thing I had to do was download "make" on
my Fedora 16 machine to make 3.81-19 ... from an older distro(Fedora 14?) by
removing my current rpm and installing the older one but it worked.
Also I'm using a different image on the sdcard. 2.6.24 from the September
image below the one I had on the ftp site.
I went in and enabled cdc_adm (it is listed as a modem driver) and followed the
module instructions.
I just load it in /etc/rc.local with instmod
And now I can get to the Arduino (tested) and I'm assuming the Micro Maestro
(shows up as /dev/ttyACM*, but not tested yet).
--- In "thomas.setliff" <> wrote:
>
> I'm unable to get /dev/ttyUSB* to show up when I plug in either of the USB to
> serial devices I have. Any help would be appreciated.
>
> I have a TS7500 with the SD image: 2gbsd-noeclipse-jun082011.dd
>
> Kernel:
> ts7500:~# uname -a
> Linux ts7500 2.6.24.4 #1 Wed Jun 8 10:37:39 MST 2011 armv4l GNU/Linux
>
> I'm trying 2 devices: an Arduino Mega and a Micro Maestro set to Serial Mode.
>
> dmesg looks like this when I load the driver, then plug something in:
> [ 90.380000] usbcore: registered new interface driver usbserial
> [ 90.380000] drivers/usb/serial/usb-serial.c: USB Serial support registered
> for generic
> [ 90.380000] usbcore: registered new interface driver usbserial_generic
> [ 90.380000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
> [ 90.870000] drivers/usb/serial/usb-serial.c: USB Serial support registered
> for FTDI USB Serial Device
> [ 90.870000] usbcore: registered new interface driver ftdi_sio
> [ 90.870000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial
> Converters Driver
> [ 1924.750000] usb 2-1: USB disconnect, address 2
> [ 1927.590000] usb 2-1: new full speed USB device using str8100-ohci and
> address 4
> [ 1927.780000] usb 2-1: configuration #1 chosen from 1 choice
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|