[ts-7000] Serial to USB issues - Arduino Mega - MicroMaestro - ftdi_sio.ko - no ttyUSB

["thomas.setliff" <>]

I'm unable to get /dev/ttyUSB* to show up when I plug in either of the USB to 
serial devices I have.  Any help would be appreciated.

I have a TS7500 with the SD image: 2gbsd-noeclipse-jun082011.dd

Kernel: 
ts7500:~# uname -a
Linux ts7500 2.6.24.4 #1 Wed Jun 8 10:37:39 MST 2011 armv4l GNU/Linux

I'm trying 2 devices: an Arduino Mega and a Micro Maestro set to Serial Mode.

dmesg looks like this when I load the driver, then plug something in:
[   90.380000] usbcore: registered new interface driver usbserial
[   90.380000] drivers/usb/serial/usb-serial.c: USB Serial support registered 
for generic
[   90.380000] usbcore: registered new interface driver usbserial_generic
[   90.380000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   90.870000] drivers/usb/serial/usb-serial.c: USB Serial support registered 
for FTDI USB Serial Device
[   90.870000] usbcore: registered new interface driver ftdi_sio
[   90.870000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters 
Driver
[ 1924.750000] usb 2-1: USB disconnect, address 2
[ 1927.590000] usb 2-1: new full speed USB device using str8100-ohci and 
address 4
[ 1927.780000] usb 2-1: configuration #1 chosen from 1 choice



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/