Re: [ts-7000] TS-MODEM2

To:
Subject:	Re: [ts-7000] TS-MODEM2
From:	Don Tucker <>
Date:	Thu, 02 Feb 2012 15:49:08 -0600

I have modprobed ts72xx_isa16550 irq=40 to use the serial interface over
the ISA bus.  Are there any other drivers that I need to load?

Don

On 2/2/2012 1:28 PM, Don Tucker wrote:

I have a TS-MODEM2 plugged into a TS-7260.  The jumpers are set all
off, except for JP5 (i.e. COM4, IRQ7).

I tried using minicom to communicate to the modem on the board by
using ttyS1 (I have previously used a TS-GSM1 that was configured as
COM3, and it used ttyS0), but I do not get a response from the board
(MultiTech Cell CDMA; 115.2kbaud, 8-N-1; hardware flow control).

Does anyone have experience using this board who can give me pointers
on how to interface with it?  I'm assuming that I can interface using
the ISA bus.

Don

smime.p7s
Description: S/MIME Cryptographic Signature

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-MODEM2, Don Tucker Re: [ts-7000] TS-MODEM2, Don Tucker <= Re: [ts-7000] TS-MODEM2 [solved], Don Tucker

Previous by Date:	Re: [ts-7000] Re: cron on 7250?, Craig Gates
Next by Date:	Re: [ts-7000] TS-MODEM2 [solved], Don Tucker
Previous by Thread:	[ts-7000] TS-MODEM2, Don Tucker
Next by Thread:	Re: [ts-7000] TS-MODEM2 [solved], Don Tucker
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU