[ts-7000] TS-MODEM2

ts-7000

[ts-7000] TS-MODEM2

To:
Subject:	[ts-7000] TS-MODEM2
From:	Don Tucker <>
Date:	Thu, 02 Feb 2012 13:28:12 -0600

I have a TS-MODEM2 plugged into a TS-7260.  The jumpers are set all off,
except for JP5 (i.e. COM4, IRQ7).

I tried using minicom to communicate to the modem on the board by using
ttyS1 (I have previously used a TS-GSM1 that was configured as COM3, and
it used ttyS0), but I do not get a response from the board (MultiTech
Cell CDMA; 115.2kbaud, 8-N-1; hardware flow control).

Does anyone have experience using this board who can give me pointers on
how to interface with it?  I'm assuming that I can interface using the
ISA bus.

Don

smime.p7s
Description: S/MIME Cryptographic Signature

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-MODEM2, Don Tucker <= Re: [ts-7000] TS-MODEM2, Don Tucker Re: [ts-7000] TS-MODEM2 [solved], Don Tucker

Previous by Date:	Re: [ts-7000] Re: cron on 7250?, Petr Štetiar
Next by Date:	Re: [ts-7000] Re: cron on 7250?, Jim Jackson
Previous by Thread:	[ts-7000] Re: What a great little device this TS-7200! Couple questions.., wawan_wiratno
Next by Thread:	Re: [ts-7000] TS-MODEM2, Don Tucker
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU