[ts-7000] TS4800, How to using XNAND for rootfs in manual..

["pakorn_0608" <>]

I use sdimage2g of ts4800 from FTP and 

"dd" it into MSD, It can boot perfectly 

from that. 
I check rootfs that have size around 

1.5GB.

Next,i try to use XNAND for boot and root 

by using command "createxnandroot".
It can boot from XNAND perfectly as well, 
and, i check rootfs again.
It have size only 243 MB.

So,How can i know what different of 

rootfs between MSD and XNAND. 
Because i develop some application on 

MSD, after finish that, i'll move it into 

XNAND later. 
Which path i should keep for this?
what is "createxnandroot" do?

One more question, Could i manual create partition on XNAND? 
I want to separate rootfs on XNAND for mounting some path like readonly, and, 
some path like read/write.

Thanks in advance.
Pakorn  



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/