hello, everyone
I have installed TS-CAN1 on TS-7300.I have still some questions about that. You
know if the Jp1 and Jp2 on my TS-CAN1 board are off, and the io address is
0x150, because the TS-7300 board PC104 8 byte I/O space starts at 0x11E0_0000,
so the CAN message will be decoded at 0x11E0_0150. My questions are:
1. Jp1 and Jp2 off, the TS-board I/O address is 0x150-0x157, it seems that only
8B I/O space in size is available. Does this mean the CAN message will be
decoded at 0x11E0_0150 to 0x11E0_0157. But a standard can frame includes 11B
ID, 8B data and so on, which is more than 8B, so is that OK?
2. If the can message is rececived by TS-CAN1, and I select the io=0x150, will
the can message be auyomatically decoded at 0x11E0_0150, or need I write some C
programms?
3. After the decoding of the CAN message, is the ID stored at 0x11E0_0150 to
0x11E0_0160? And where are the 8Bytes data? If I wanna get these data, need I
write some programms or call some API functions.
Thank you! I'm beginner in the usage of the TS-7300 and TS-CAN1.
regards
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|