ts-7000
[Top] [All Lists]

Re: [ts-7000] TS-7553 and TS-9448 problems

To:
Subject: Re: [ts-7000] TS-7553 and TS-9448 problems
From: Trevor Smith <>
Date: Thu, 17 Nov 2011 08:52:56 -0500


Hey everyone, I actually got it going. Turns out my serial cable would work with the TS-7200, but that same cable would not work with the TS-7553. Thanks!

On Wed, Nov 16, 2011 at 9:12 AM, eringossamer <> wrote:
 

Hey Gang,

I just recently switched from the TS-7200 to the TS-7553. I can't seem to get a console, even when using the TS-9448. I have it plugged in and set up, and I have the correct settings (115200, 8n1, none) and yet the most I can get are some garbled up random characters. Any help with this would be greatly appreciated.

Also, will I be able to use the same custom 2.6.29 kernel that I was using on my TS-7200 on my TS-7553? Thanks for any help and have a great day!




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU