Hello ALL,
I'm a beginner here, and I'm trying to develop a simple application solution on
the hardware I recently purchased - TS-TPC-8390/TS-4800.
I've never really worked on any hardware like this before, but I figure jumping
with both feet in, might be a good approach(?).
Here is what I want to do (in-a-nutshell): I want a simple keypad (3x3)
interface to be displayed on the touchscreen, and when the user pushes any one
of the buttons it triggers a high/low on one of the DIO pins. That's it!
I figured I'd start with developing the back-end first, and programming the
logic to handle the inputs and assign them to the relevant output pins - but I
have no idea how to initialize and to trigger a DIO pin.
>From there, I will need to work on the graphical part, which I have no clue on
>how to do on such a low-level system, and then finally stitch both pieces
>together to make a complete solution.
If anyone can give me some tips, suggestions, snippets of code to get me
started, I'd greatly appreciate it.
Thank you in advance!
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|