| To: | |
|---|---|
| Subject: | [ts-7000] I can not connect to TS-7800 with Serial Port |
| From: | "openmindjesus" <> |
| Date: | Sun, 06 Nov 2011 14:01:50 -0000 |
Good morning,
I resumed my work with the TS-7800 after 2 years, but I find that the device is
not showing anything for the COM1 console (115200 8-N-1). However, telnet to
192.168.0.50 find that the device is operating effectively with fastboot. How
could I know that is failing?, And check the following:
- The PC serial port is working.
- The JP2 is connected.
Not know what else to review, please help.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: ts7800 DIO output only outputs at 50 Hz, Jonathan Leslie |
|---|---|
| Next by Date: | Re: [ts-7000] I can not connect to TS-7800 with Serial Port, Walter Marvin |
| Previous by Thread: | [ts-7000] Re: IDEs, Ian Thompson |
| Next by Thread: | Re: [ts-7000] I can not connect to TS-7800 with Serial Port, Walter Marvin |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU