Its really a magic....works perfectly..
many thanks
I'm in Jakarta, it use 900/1800,
by default q64 was set to 4,0 it means 850/1900
I cannot found this command on wavecom doc file from embeddedarm resources.
after googling with at+wmbs as keyword there, is a frequency table.
Return value Description
+WMBS: 0,x Mono band mode 850 MHz is selected
+WMBS: 1,x Mono band mode extended 900 MHz is selected
+WMBS: 2,x Mono band mode 1800 MHz is selected
+WMBS: 3,x Mono band mode 1900 MHz is selected
+WMBS: 4,x Dual band mode 850/1900 MHz is selected
+WMBS: 5,x Dual band mode extended 900/1800 MHz is selected
+WMBS: 6,x Dual band mode extended 900/1900 MHz is selected
we can set at+wmbs=5,1 to change it immediately.
at+wmbs? to check current setting.
> I digged out some old email and the magic command was AT+WMBS. Probably
> found it in one of the wavecom PDFs. Hope it works for you as it did for me.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|