On 14/10/11 13:41, Jim Jackson wrote:
>
>
> On Fri, 14 Oct 2011, Simon Leung wrote:
>> On 14/10/11 03:55, wawan_wiratno wrote:
>>> now I'm starting desperate.
>>>
>>> my ts-7200 with ts-gsm1 and q64 module still fail to register to network.
>>>
>>> - antenna mmcx to sma converter
>>> - JP5 on, IRQ7
>>> - debian kernel 2.4 ts
>>> - using simcard which is already tried with mobile and got full bar signal
>>>
>>> but still, the led not blinking,
>>>
>>> any help very appreciated...
>> Are you using this in Europe? If so you're having the same problem as I
>> did. The GSM1 board is by default configured to be used in north
>> america. There is an vendor AT command that switches this modes.
> Hi, do you have more information on this? I've seen this problem in the UK,
> but am not too familiar with GSM. Any info you can give would help a
> colleague.
>
> cheers
> Jim
I digged out some old email and the magic command was AT+WMBS. Probably
found it in one of the wavecom PDFs. Hope it works for you as it did for me.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|