--- In Mark Featherston <> wrote:
>
> Mike,
>
> You can read more about the cygwin project here:
> http://www.cygwin.com/
>
> However I suspect you may be looking for one of the precompiled toolchains.
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7250-linux/cross-toolchains/crosstool-cygwin-gcc-3.3.4-glibc-2.3.2.tar.bz2
>
> We also have Eclipse already set up with our cross compilers. This is
> often the simplest way to develop from windows for these boards.
> ftp://ftp.embeddedarm.com/misc/eclipse/eclipse-ide-ts7000.zip
Thanks; I'll take a look at both.
>>I'm reading the TS manuals, trying to figure out how to fdisk a new
>> flash drive and install Debian on it, to replicate the lost developer's kit.
> I believe this process must be done from a linux system. Take a USB
> drive and format it with one partition as type 'ext2'. Download this
> archive:
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7250-linux/distributions/debian-sarge-usb_default.tar.gz
Maybe the simplest thing to do is boot to an NFS drive on my Linux server, and
run GCC from there.
Thanks again.
--- Mike
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|