ts-7000
[Top] [All Lists]

[ts-7000] Re: Serial port example for TS7800

To:
Subject: [ts-7000] Re: Serial port example for TS7800
From: "ilker.yangz" <>
Date: Tue, 06 Sep 2011 09:52:38 -0000
hi all,
i cant open the com3. Error is input output error from tcgetattr and tcsetattr. 
pls help me for open port. 
thanks

--- In  "JD" <> wrote:
>
> Thanks for that
> 
> Things seem to be working except for anything on COM3 - the port opens
> ok and sets the baudrate etc, but I never seem to get anything on the
> terminal window on the other end.
> 
> Since the others are all working ok, I guess it must be some other
> issue stopping anything on the com 3 header from working.
> 
> 
> 
> --- In  "Michael Schmidt" <michael@> wrote:
> >
> > 
> > On Wed, January 2, 2008 1:09 pm, JD wrote:
> > > ok,
> > >
> > > Got a little confused previously when mknod /dev/ttyS3 was used for
> > > the first ts port, and made me think that perhaps the 3rd port was CPU
> > > based.
> > 
> > Well it is a little confusing because the first two TS-UARTs are
> actually
> > on the flow control pins for COM1 and 2.  The third TS-UART is
> actually on
> > the normal COM3 pins.
> > 
> > >
> > > Is there a document that says which com port corresponds to which on
> > > the DB9 connectors (apart from the com1,2&3)?
> > 
> > This information is in the preliminary TS-7800 manual at
> > http://oz.embeddedarm.com/~michael/support/ts7800.html, under the
> "UARTs"
> > section.
> > 
> > > The comports info.txt file just says howmany there are, whilst the
> > > schematic shows the ppinds but named using the cts/rts name, but I
> > > didnt see any reference to say which was for which.
> > 
> > 
> >  ______   Best Regards,
> > |__  __/                  Michael Schmidt
> >    ||                   Software Engineer
> >    ||echnologic Systems (EmbeddedARM.com)
> >    || (480)    16610 East Laser Drive #10
> >    |/ 837-5200   Fountain Hills, AZ 85268
> >        http://oz.embeddedarm.com/~michael
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Re: Serial port example for TS7800, ilker.yangz <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU